-
- Polyurethane Tooling Boards
RAKU‐TOOL SB‐0080
- Density: 80 kg/m³ Key Properties Stable during milling Temperature resistant up to 100°C Solvent resistant Homogeneous foam structure Applications Design studies CAM program proving models Substructures for Close Contour pastes Substructures for clay
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL SB‐0140
- Density: 140 kg/m³ Key Properties Fine foam structure with low density Temperature resistant up to 100°C Large size boards Stable during milling Applications Interior mockup Design and styling models
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL SB‐0240
- Density: 240 kg/m³ Key Properties Good chip formation during milling Large and standard size boards Very fine foam structure Very stable during milling Applications Interior and exterior mockup Molds for composite prototype parts Wind tunnel models
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL SB‐0301
- Density: 300 kg/m³ Key Properties Fine surface structure Easy to machine, minimal dust Applications Design and styling models Laminating molds
- Details
-
- Polyurethane Tooling Boards
RAKU-TOOL SB-0351
- Density: 350 kg/m³ Key Properties Hard surface with low density High dimensional stability Very stable during milling Applications Cutting jigs Design and styling models
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL SB‐0470
- Density: 470 kg/m³ Key Properties Easy to seal and varnish Finest foam structure Good chip formation during milling Very stable during milling Applications Architectural models Interior and exterior mockup Master models Molds for composite prototype parts Thermoforming tools Water channel models Wind tunnel models
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL MB‐0600
- Density: 600 kg/m³ Key Properties Fine surface structure Easy to shape and machine Easy to seal and varnish Wide range of thicknesses Applications General purpose master models Models and molds Trimming jigs
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL MB‐0670
- Density: 670 kg/m³ Key Properties Fine surface structure Excellent milling characteristics Easy to seal and varnish Good temperature resistance Standard modeling board Wide range of thicknesses Applications Master models Master models for composite molds Molds for composite prototype parts Architectural models Wind tunnel models Water channel models Thermoforming tools for prototypes
- Details
-
- Epoxy tooling boards
RAKU-TOOL WB-0691
- Density: 690 kg/m³ Key Properties Temperature resistant up to 110°C Low linear coefficient of thermal expansion Low odor during milling Stable during milling Fine surface structure Applications Lay-up tools for low temperature prepregs Thermoforming tools
- Details
-
- Out of Stock
- Epoxy tooling boards
RAKU-TOOL WB-0700
- Density: 700 kg/m³ Key Properties Temperature resistant up to 130°C Dimensionally stable after post-cure Low linear coefficient of thermal expansion Excellent milling characteristics Very fine surface Applications Lay-up tools for prepregs Thermoforming tools
- Details
-
-
- Polyurethane Tooling Boards
RAKU‐TOOL MB‐0720
- Density: 720 kg/m³ Key Properties Very fine surface structure Excellent milling characteristics High edge strength Wide range of thicknesses Good dimensional stability Good temperature resistance Applications Data control models Master models for tires Thermoforming tools for prototypes Molds for composite prototype parts Architectural models Assembly jigs for plastic parts Checking fixtures for plastic parts
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐0801
- Density: 800 kg/m³ Key Properties Good solvent resistance High heat deflection temperature with low density High mechanical strength with low density Low linear coefficient of thermal expansion Applications Foundry models for prototypes Jigs and fixtures for plastic parts Thermoforming tools
- Details
-
- Out of Stock
- Epoxy tooling boards
RAKU-TOOL WB-0890
- Density: 890 kg/m³ Key Properties Very fine surface structure Good dimensional stability Temperature resistant up to 110°C Excellent milling characteristics Applications Lay-up tools for low temperature prepregs Thermoforming tools
- Details
-
-
- Lubricants
MOLYKOTE 1000 PASTE 1KG
- 72,90 €
- Lead- and nickel-free anti-seize paste for bolted joints up to +650°C. Provides consistent friction, corrosion protection, and easy dismantling after long service.
- Details
-
- Lubricants
MOLYKOTE 1000 PASTE 400ml
- 35,45 €
- Lead- and nickel-free anti-seize paste for bolted joints up to +650°C. Provides consistent friction, corrosion protection, and easy dismantling after long service.
- Details
-
- Lubricants
MOLYKOTE 1000 PASTE 100g
- 11,78 €
- Lead- and nickel-free anti-seize paste for bolted joints up to +650°C. Provides consistent friction, corrosion protection, and easy dismantling after long service.
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1000
- Density: 1000 kg/m³ Key Properties Easy to mill Low linear coefficient of thermal expansion Very fine surface structure Applications Architectural models Checking fixtures Foundry models Thermoforming tools
- Details
-
- Lubricants
MOLYKOTE S-1013 SPRAY 400ml
- 15,17 €
- Chlorine-free cutting fluid spray that extends tool life, reduces heat, and allows higher cutting speeds.
- Details
-
- Sealers & Release Agents
MR 1080 5L
- 80,41 €
- Semi-permanent release agent for rotomolding.
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1222
- Density: 1220 kg/m³ Key Properties Good abrasion resistance Low wear of milling tools Most proven working board on the market Resistant to amine Resistant to dry ice cleaning Applications Checking fixtures for metal parts Foundry pattern plates Hammer tools
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1250
- Density: 1250 kg/m³ Key Properties Easy to mill Low wear of milling tools Resistant to dry ice cleaning Excellent abrasion resistance Excellent amine resistance Applications Foundry core boxes Foundry models Foundry pattern plates
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1258
- Density: 1200 kg/m³ Key Properties Excellent abrasion resistance High impact resistance High edge strength Excellent milling characteristics Excellent resistance to chemicals Applications Pattern plates Core boxes
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1404
- Density: 1400 kg/m³ Key Properties Polishable Good abrasion resistance Good amine resistance Good styrene resistance Low coefficient of thermal expansion Resistant to dry ice cleaning Applications Checking fixtures for metal parts Foundry models Foundry pattern plates and core boxes Hammer tools Models and molds for composite applications Models and molds for polyester applications Molds for low pressure RIM Thermoforming tools
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1460
- Density: 1460 kg/m³ Key Properties Good abrasion resistance Made with recycling polyol Resistant to amine Resistant to dry ice cleaning Applications Foundry models Foundry pattern plates
- Details
-
- Lubricants
MOLYKOTE G-1502 FM GREASE 400g
- 30,71 €
- NSF H1 food-grade synthetic grease offering outstanding adhesion, water resistance, and corrosion protection. Ideal for chains, gears, valves, and bearings in food processing and industrial machinery.
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1600
- Density: 1600 kg/m³ Key Properties Good mechanical properties Low linear coefficient of thermal expansion Applications Jigs and checking fixtures for metal parts Metal sheet forming tools Thermoforming tools
- Details
-
- Polyurethane Tooling Boards
RAKU‐TOOL WB‐1700
- RAKU‐TOOL WB‐1700 Density: 1700 kg/m³ Key Properties Polishable Temperature resistant up to 120°C Low friction resistance Excellent mechanical properties Very low linear coefficient of thermal expansion Applications Jigs and checking fixtures for metal parts Metal sheet forming tools Preform tools for RTM Prototyping RTM tools Thermoforming tools
- Details
-
- Sealers & Release Agents
DIPOL 1715 SO 18KG
- 100,50 €
- General purpose mold release spray.
- Details
-
- Sealers & Release Agents
RTM 2019 RE39 5KG
- 89,75 €
- Specialized release agent for rotational moulding processes.
- Details
-
- Lubricants
MOLYKOTE 3402C ANTI-FRICTION COATING 500g
- 98,73 €
- Air-curing dry-film lubricant combining excellent lubricity with corrosion protection. Designed for high pressure and wear resistance.
- Details
-
- Lubricants
MOLYKOTE G-4500 SPRAY 400ml
- 26,00 €
- White NSF H1 food-grade synthetic greases for multi-purpose use. Provide excellent wear resistance, plastic compatibility, and wide service range from -40°C to +150°C.
- Details
-
- Lubricants
MOLYKOTE G-4501 Grease 400g
- 30,72 €
- White NSF H1 food-grade synthetic greases for multi-purpose use. Provide excellent wear resistance, plastic compatibility, and wide service range from -40°C to +150°C.
- Details
-
- Lubricants
MOLYKOTE G-4700 GREASE 390g
- 32,91 €
- Black synthetic grease fortified with MoS₂, designed for extreme loads, vibration, and shock loading. Provides long-lasting wear protection across -40°C to +177°C.
- Details
-
- Lubricants
MOLYKOTE CU-7439 PLUS 100g
- 9,91 €
- Copper-based anti-seize paste for high-temperature, high-pressure connections. Offers strong adhesion, water resistance, and long-lasting corrosion protection.
- Details
-
- Lubricants
MOLYKOTE CU-7439 PLUS Spray 400ml
- 22,00 €
- Copper-based anti-seize paste for high-temperature, high-pressure connections. Offers strong adhesion, water resistance, and long-lasting corrosion protection.
- Details
-
- Vacuum Consumables
K7666 63µm Flash tape 204°C – width 50mm – lenght 60m
- 59,28 €
- PES/Silicone total thickness 63?
- Details
Shop
This is where you can browse products in this store.
